Springfield Armory Forums banner
1 - 3 of 3 Posts

· RETIRED MODERATOR
Joined
·
3,608 Posts
Discussion Starter · #1 ·
Pictured below is my Remington Model 700BDL chambered in 7mm Rem Mag with a 24" barrel.



The 700BDL is a manually-operated bolt action with 2 forward dual-opposed lugs and a rear safety lug formed by the bolt handle lug sitting in a receiver recess. The bolt face is recessed, fully enclosing the base of the cartridge, and the extractor is a C-clip sitting within the bolt face. The ejector is a plunger on the bolt face actuated by a coil spring. The bolt is of 3-piece construction, brazed together (head, body and bolt handle). The receiver is milled from round cross-section steel. Depending on caliber, the internal magazine holds either 3, 4, or 5 cartridges and has a flush floor plate for quick unloading. The rifle can also be ordered with a detachable box magazine.
__________________
 

· RETIRED MODERATOR
Joined
·
3,608 Posts
Discussion Starter · #2 ·
Pictured below is kind of a rarity in the hunting rifle circle...a Remington 7600 pump action rifle chambered in 30.06 Springfield. It has a 22" barrel and can be stored with the hammer down, magazine loaded, and chamber empty. To make it ready to shoot quickly, the user would only need to pump the slide. It was my very first hunting rifle...


__________________
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top