Springfield Armory Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
44 Posts
Another good oil finish is Birchwood Casey Tru-Oil. It can be applied with your fingers and so avoids any lint.

You can use 000 or 0000 steel wool to lightly remove any roughness initially or between coats.

Same as linseed oil, apply along direction of grain and in very thin coats.

(edited) - I see that I missed page two of this topic.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top