Springfield Armory Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Pick up a used XDs 45 about 2 months ago
For a rear good price. Owner had a lot of problems with FTF. Check it out and had to send in for recall work. Long story short,
Have came down with tendinitis in Rt thumb.
Need to make a light load to shot until all is better. I have a very good load for my xdm 40 but this will be my first load for 45acp.
Any help?
 

·
Registered
Joined
·
25 Posts
I have had good luck with the following:

4.0 grains Bullseye
200 grain plated round nose
1.255 OAL

and

4.3 grains Clays (This is a max load, consult your manual for starting charge)
200 grain plated round nose
1.255 OAL

Both of these functioned in my XDs 3.3 when I had it and were lower recoil. While these loads were safe for me, please follow your reloading manual and work up from the bottom.
 
1 - 5 of 5 Posts
Top