Springfield Armory Forums banner

EMP3 becoming hard to rack

3K views 3 replies 4 participants last post by  ca survivor 
#1 ·
I have had my EMP3 since March 2, 2018. As many of us EMP3 owners, I had to send it to Customer Service (CS) early on due to mid-feeds, shells not ejecting after firing, and several other problems. CS fixed all my problems, and the pistol has been very reliable since.
But now it is really difficult to rack. It takes a tremendous amount of effort. Does any other EMP3 owner has this issue? I keep it very clean, and always clean it after firing it, and properly lubed.
Just thought I'd see if I may hear something that will help.
Thank you for listening,
Robert Watson
drwatson48@yahoo.com
 
#2 ·
What recoil spring is in it? 11Lb 13? more? Did CS replace the recoil spring. If you cock the pistol before racking it is that easier? The main spring is also named hammer spring by some and the recoil spring is the only 2 items that make racking hard that i can think of.
 
#3 ·
I haven't had the exact problem you are having, but I did change my grips and put the Pearce rubber finger grooves on mine. Right after that, my slide was very tight and kinda hard to rack. I then took it to the range and sent 100 rounds or so through it, came home and cleaned it, and now it is smooth as butter again. Go figure, because nothing else changed. Did you change your grips, screws, lube, grease, anything else prior to this tightness?
I have had my EMP3 since March 2, 2018. As many of us EMP3 owners, I had to send it to Customer Service (CS) early on due to mid-feeds, shells not ejecting after firing, and several other problems. CS fixed all my problems, and the pistol has been very reliable since.
But now it is really difficult to rack. It takes a tremendous amount of effort. Does any other EMP3 owner has this issue? I keep it very clean, and always clean it after firing it, and properly lubed.
Just thought I'd see if I may hear something that will help.
Thank you for listening,
Robert Watson
drwatson48@yahoo.com
 
#4 ·
I have had my EMP3 since March 2, 2018. As many of us EMP3 owners, I had to send it to Customer Service (CS) early on due to mid-feeds, shells not ejecting after firing, and several other problems. CS fixed all my problems, and the pistol has been very reliable since.
But now it is really difficult to rack. It takes a tremendous amount of effort. Does any other EMP3 owner has this issue? I keep it very clean, and always clean it after firing it, and properly lubed.
Just thought I'd see if I may hear something that will help.
Thank you for listening,
Robert Watson
drwatson48@yahoo.com
First cock the hammer, one less spring to fight with, grab the full slide with the weak hand and the grip with your shooting hand, low in front of you push the grip hand forward and let the slide go, I had 70s year old lady's with arthritis do it that way.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top